Visit the SilverTron Store today for the world's best colloidal silver machines.

Author Topic: power supplies  (Read 486 times)

0 Members and 1 Guest are viewing this topic.

marvelous

• Participant
• Posts: 6
• Likes: 0
power supplies
« on: September 11, 2017, 05:57:13 PM »
I am new here, was wondering, apparently I have been making ionic silver (which sounds on here like it is useless) rather than colloidal silver. I have the silver wires, hot plate with magnetic stirrers, just went and bought the sodium carbonate, I have some Karo Syrup. But the power supply that I have been using is what I was wondering about? My unit is 30 volts and 8 amps. Sounds like it is way to much power since this forum is talking about milliamps. Is there some way I can use it or do I need a different power supply?

wgpeters

• Kephra's other account
• Participant
• Posts: 187
• Likes: 2
Re: power supplies
« Reply #1 on: September 11, 2017, 06:20:15 PM »
The 8 amp rating on your power supply is the maximum it can supply without hurting itself.  The actual current that it will supply depends on the resistance of the load (electrolysis cell).
For example, suppose that the electrical resistance of your cell is 1000 ohms.  Then the power supply  would put out 30 volts divided by 1000 ohms which equates to 30 milli-amps.

This is Ohms Law:  Current = Voltage / Resistance.

The problem is that you do no know what the resistance of your cell actually is.  Cell resistance depends on a lot of variables.  To handle that, you need to add a current regulator between your cell and the power supply.  You can search online for circuit diagrams for constant current regulators.  They range from very simple to dizzying complexity.  Look for a simple one.

A constant current regulator circuit adjusts the anode voltage such that the current through the cell remains the same even if the cell resistance changes.

When first starting out, I recommend setting your current to 5 milli-amps until you master the process, especially if you don't have a magnetic stirrer.

Since this forum is supported solely by the sale of SilverTrons, I do not supply schematics or components.

Bobby

• Expert
• Participant
• Posts: 674
• Likes: 15
• "I walk slowly, but I never walk backward" Lincoln
Re: power supplies
« Reply #2 on: September 12, 2017, 03:58:42 AM »
marvelous,

I tried that route but keeping track of all the wires & meters was a pain for meâ€¦although I love watching the meters.  If you don't mind the extra wires and prefer using your on power supply then Kephra's advice is the way to go.

Figure the cost of all the components you have left to buy and subtract it from about 160-165 dollars for a new SilverTron Jr and see if the cost difference is worth the added time and effort you will be putting in.

If you are needing genuine colloidal silver pretty quick, then the SilverTron Jr is only 1 of 2 ways to go to get the genuine stuff.  I've found you can't really buy it and who would with the over inflated prices they chang.  Plus your are taking a big risk by trusting these uneducated (in the production of colloidal silver), uncaring, money hungry scoundrels.  The 2nd way to get genuine colloidal silver is make it yourself with a SilverTron Elite.

It sounds like your sure your making ionic silver and there are good uses for IS, but caution is advised.  You do have to make IS to get colloidal silver.  I'm sure you already know that you HAVE to know the PPM to proceed forward on production or your just wasting your time and money.  This is where you want the repeatability and quality that a SilverTron provides.

These are things to think about that I'm sure you already have.  But I didn't think it all through and ended up wasting 800-900 bucks and wasting a couple years researching and filling my head with useless instructions, equipment, recipes and advise.  When you compare the colloidal silver you can make with the SilverTron generator to what's available out there right know, whether you buy it finished or make it with a competitors generator, it will be clear as day which way to go.

I guess the question is, How soon do you need genuine colloidal silver?

Bobby
"Nearly all men can stand adversity, but if you want to test a man's character, give him power"  Abraham Lincoln