15 mA
I also posted the following but can't find it so this is either the first or 3rd time I've posted, so sorry, I give up on posting the picture I had with it though...
I've made 4 batches now of colloidal silver, all have turned out properly colored clear and tasteless like the picture I posted to run it by the experts a few days ago...but question...today, I almost finished my first quart and so I'm almost to the bottom and I saw like little black specks on the bottom and when I tipped the mason jar to look at it and shook it, also saw like tiny flecks or thinner than a hair like short strands? of silver?
I've been cleaning the rods with a green scrubber after each batch but of course the rods are still dull but should they be? Is it still ok to take internally? I tried to attach picture but ya'll probably don't need it.
Have been using 12 & 15 MA, 20 PPM, adjusting depth of neg rod to make it 10 volts. Not heated, no stirrer but I stay close and agitate/swirl it several times when I see a smoke stream.. Quart jar, room temp.distilled water. 20 drops according to instructions pre turning on machine and 5 drops of reducer and 3-4 min. in microwave.