11
Forum Rules and Notices / Moved to a new server
« Last post by kephra on April 10, 2020, 08:16:15 AM »I had to move this site to a new server, and restore it from an old backup. Some posts may have been lost.
Recent Posts
12
SilverTron Notes And Support Questions / Re: 320ppm batch to make ...first time
« Last post by Thelegend on September 17, 2018, 03:23:47 AM »So finally got the karo syrup -
put in some distilled water gelatin- let sit for 5 mins ---
heated - set for 15ma - was having issues getting above 10 ( was hovering around 9 - i eventually got it though - raising the coppper above a bit and eventually the silver as well.. - after about a minute or so i got it and stable from 10-12
half way had the adjust the copper down a bit
then random spots had to adjust again a few times to make sure it was between 10 and 20
pic or didnt happen is attached - ill dilute and see wwhat i get - its to dark for me to tell if it is good or not.
put in some distilled water gelatin- let sit for 5 mins ---
heated - set for 15ma - was having issues getting above 10 ( was hovering around 9 - i eventually got it though - raising the coppper above a bit and eventually the silver as well.. - after about a minute or so i got it and stable from 10-12
half way had the adjust the copper down a bit
then random spots had to adjust again a few times to make sure it was between 10 and 20
pic or didnt happen is attached - ill dilute and see wwhat i get - its to dark for me to tell if it is good or not.
13
SilverTron Notes And Support Questions / Re: SilverTron Elite v. 4
« Last post by kephra on August 18, 2018, 01:59:45 PM »Quote
If you decide to stop production, have you considered selling your SilverTron design(s) to some enterprising entrepreneur?I might do that. A couple people already approached me about that.
14
SilverTron Notes And Support Questions / Re: SilverTron Elite v. 4
« Last post by FromTheDen on August 18, 2018, 01:51:00 PM »A digression, but interesting all the same. So sorry to hear that you're feeling drained. 72 is a respectable age, but may your remaining time be long & fruitful.
I have not seen the source documents, but I have heard that scientists in Korea developed the technology to measure the fields referenced in Traditional Chinese Medicine & the like. There's a lot out there we don't understand.
If you decide to stop production, have you considered selling your SilverTron design(s) to some enterprising entrepreneur?
I have not seen the source documents, but I have heard that scientists in Korea developed the technology to measure the fields referenced in Traditional Chinese Medicine & the like. There's a lot out there we don't understand.
If you decide to stop production, have you considered selling your SilverTron design(s) to some enterprising entrepreneur?
15
SilverTron Notes And Support Questions / Re: SilverTron Elite v. 4
« Last post by kephra on August 18, 2018, 10:10:14 AM »Thanks for the idea, but I really doubt there will be a SilverTron V4.
I'm 72 years old, tired, and frankly drained. I don't have it in me to do another version. I am seriously considering stopping production of the SilverTrons, as there are other things I want to do with my remaining time.
Also, I really doubt that Becker's system worked the way he thinks it did.
For one, it takes a minimum of 0.8 volts to create a silver ion from silver metal.
Second, he thought that the minimum voltage depended on the surface area of the anode. If it worked as described, the effect would have been dependent on current vs area, not voltage.
Assuming Becker actually got the results he claimed (I believe he did), then it was probably due to some other effect. Perhaps he was activating or amplifying the morphogen(et)ic field. Once you delve into morphogenics, you have left the fields of chemistry, physics, and electronics.
You may think that your physical characteristics were determined by your genetic code, but I have come to the conclusion that this is false. Genes only code proteins. True, defective genes lead to defective or missing proteins and thus affect the health of an individual, but they do not make a person resemble his parents. My hunch is that a persons morphogenic field is fixed at conception from the combined morphogenic fields of the parents.
Kirlian photography has shown that a field exists even for a missing limb or part of a body. A leaf from a tree cut in half shows the entire leaf when photographed with Kirlian photography. A man with a missing leg shows the field from the missing leg with Kirlian photography.
But, I digress.....
I'm 72 years old, tired, and frankly drained. I don't have it in me to do another version. I am seriously considering stopping production of the SilverTrons, as there are other things I want to do with my remaining time.
Also, I really doubt that Becker's system worked the way he thinks it did.
For one, it takes a minimum of 0.8 volts to create a silver ion from silver metal.
Second, he thought that the minimum voltage depended on the surface area of the anode. If it worked as described, the effect would have been dependent on current vs area, not voltage.
Assuming Becker actually got the results he claimed (I believe he did), then it was probably due to some other effect. Perhaps he was activating or amplifying the morphogen(et)ic field. Once you delve into morphogenics, you have left the fields of chemistry, physics, and electronics.
You may think that your physical characteristics were determined by your genetic code, but I have come to the conclusion that this is false. Genes only code proteins. True, defective genes lead to defective or missing proteins and thus affect the health of an individual, but they do not make a person resemble his parents. My hunch is that a persons morphogenic field is fixed at conception from the combined morphogenic fields of the parents.
Kirlian photography has shown that a field exists even for a missing limb or part of a body. A leaf from a tree cut in half shows the entire leaf when photographed with Kirlian photography. A man with a missing leg shows the field from the missing leg with Kirlian photography.
But, I digress.....
16
SilverTron Notes And Support Questions / Re: SilverTron Manuals (PDF files)
« Last post by FromTheDen on August 18, 2018, 08:51:36 AM »You might want to pin these to the top.
17
SilverTron Notes And Support Questions / SilverTron Elite v. 4
« Last post by FromTheDen on August 18, 2018, 08:50:16 AM »I have an idea for the next version, the SilverTron Elite v. 4!
Considering that Dr. Becker passed on and apparently no one picked up the baton, what about adding a SilverTron mode that provides an adjustable low voltage output for wound care? Finding an appropriate material for the anode might be a challenge, but there must be something out there.
https://www.lens.org/images/patent/US/5814094/A/US_5814094_A.pdf
Considering that Dr. Becker passed on and apparently no one picked up the baton, what about adding a SilverTron mode that provides an adjustable low voltage output for wound care? Finding an appropriate material for the anode might be a challenge, but there must be something out there.
https://www.lens.org/images/patent/US/5814094/A/US_5814094_A.pdf
18
SilverTron Notes And Support Questions / Re: 320ppm batch to make ...first time
« Last post by Thelegend on August 10, 2018, 06:23:33 PM »great thanks ill buy the light karo syrup and try again when i get my hotplate 
thanks for the help!
thanks for the help!19
SilverTron Notes And Support Questions / Re: 320ppm batch to make ...first time
« Last post by kephra on August 10, 2018, 02:06:54 PM »Thats the right Karo.
20
SilverTron Notes And Support Questions / Re: 320ppm batch to make ...first time
« Last post by Thelegend on August 10, 2018, 01:33:43 PM »o okay so i need maltose as well - sorry i meant to mean the dextrose was used to replace the karo syrup
what kind of karo corn syrup ?
i found some darker stuff that has a bunch of bad stuff in it sodium benzoate caramel color flavor
the light stuff looks fine although it has vanilla in it
will something like this work fine?
https://www.amazon.ca/Karo-Light-Corn-Syrup-16/dp/B00061EYDW/ref=sr_1_1?s=hi&ie=UTF8&qid=1533922155&sr=8-1&keywords=karo+corn+syrup
what kind of karo corn syrup ?
i found some darker stuff that has a bunch of bad stuff in it sodium benzoate caramel color flavor
the light stuff looks fine although it has vanilla in it
will something like this work fine?
https://www.amazon.ca/Karo-Light-Corn-Syrup-16/dp/B00061EYDW/ref=sr_1_1?s=hi&ie=UTF8&qid=1533922155&sr=8-1&keywords=karo+corn+syrup